Featrues: 1.50,800 mAh high capacity, multifunction power battery charger 2.Support 12V vehicle jump starter and charge for various cell phones, PSP, MP3/MP4, PDA, Laptops, car refrigerator / cool box. 3.5-7 times to full charging of iPhone or mobile phone,according the different types of mobile phone battery or battery capacity. 4.Approximately 20 times starting a vehicle when fully charged. 5.Power charge of this device will remain 3~6 months without recharging (standby) 6.Battery can be charged at home using a wall charger or inside the vehicle using the cigarette lighter adapter. 7.Safe, reliable, and perfect for everyday driving, traveling and outdoor activities. This device is a must in every vehicle, home, and or even for personal carry on.
For jumping start of 12V vehicle 1.Make sure that electricity power is not less than 40%. 2.Connect the red battery clamp of jumper cable to the vehicle's positive(+)battery terminal and connect the black battery clamp of jumper cable to the vehicle's negative(-)battery terminal. 3.Plug the cord of jumper cable into the jump socket. 4.Start the vihicle. 5.When the vehicle starts,remove jumper cable from Jump Starter and disconnect red and black clamps to the vehicle battery terminals within 30 seconds. 6.Leave the vihicle's engine running.
For charging/power supply to the Notebook 1.Select appropriate adapter for your Notebook and connect it with the offered cable. 2.Plug the cable into Jump Starter output port. 3.Plug adapter to your Notebook. 4.Press the switch button to charge/power supply.
For charging to mobile phones or tablets 1.Select appropriate phone adapter for yourmobile phones or tablets and connect it with the offered cable. 2.Plug the cable into Jump Starter USB output port. 3.Plug adapter to your mobile phones or tablets. 4.Press the switch button to charge/power supply.
For power supply to 12V vehicle products or 12V electronics 1.Plug the optional switch cable to 12V 2A output port. 2.Connect the optional switch cable and 12V vehicle products or 12V electronics. 3.Press the switch button to power supply.