KEY STRENGTHS: Does the wire you've pulled and connected to all equipment working? This Multi-Network Cable Tester is the perfect troubleshooter, it instantly checks your LAN cable wiring for proper continuity and wiring pattern, shorts, cable sequence and pair integrity. The tester will automatically detect far-end matcher (ID) or local port (L) cable and displays if the far-end of cable to be checked does not insert into the far-end matcher (ID) or if the cable does not insert into the local port (L) in local test. The SC-8108 network cable tester instantly check your LAN cable wiring for proper continuity, shorts, and pair integrity. Test results are digitally shown via its LCD and it instantly displays the exact configuration of the cable. It performs line test without requiring the external adaptor. With single board computer software watchdog design and reliable operating time. This covers wide array of applications such as cable connection sequence, length, user jumper or crossfire, cable connection continuity and determine any open circuit, short circuit, jumper or cross-talk interference.
Standardizations: Safety of the buyr or the one that will use our product is always in our mind. We made sure that SC-8108 has CE-Approval and that it bears the CE marking which certifies its compliance with the essential health standards and safety requirements set out by the European Directives, thus your safety while using the SC-8108 is assured.
Do your cabling with confidence! Prevent and solve cable installation/maintenance problems instantly!
Key Features:
A person is enough to complete cable continuity check and cable sequence, the easy way
Indicates pair integrity of the cable
Measure length and pair with or without far-end recognizer
Locates the wiring or connection error
Measure cable length and determine the distance of open circuit and short circuit
Permits you to check wiring error in 5E/6E twisted cord network, coaxial cable and telephone line
Applicable for open circuit, short circuit, jumper wire, reverse connection or cross-talk interference
Dynamically calibrate cable length and make length measurement as accurate as 97%
Simple and easy use, big LCD screen to display test clear
Portable unit with long battery life (wait-case or standby mode for over 50 hours)
Auto time delay shut off
Comes with 1 far-end passive test jack
Far end recognizer with prompt voice
Single board computer software watchdog design and reliable operating
Self-checking function and automatically compensates any change in battery capacity or ambient temperature
Specifications:
LCD: 4 x 16 characters big LCD screen (valid visual field 61.6 x 25.2 mm)
Type of Tester Cable: STP / UTP twin twisted cable, coaxial cable, telephone line
Tester Port
Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R)
The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
Length Measurement of Twin Twisted Cable:
Scope: 1 to 350M (3 to 1,200 FT) calibration
Calibration accuracy: 3% (±0.5m or ±1.5 ft) (calibrating cable > 5 M)
Shipment accuracy: 5% (±0.5m or ±1.5 ft) (AMP, AT&T Class 5 cable)
Unit of Measurement: Display in meter (M) or feet (FT)
Length Calibration: User can set self-calibration factor by a given length cable; The length of calibrating cable is more than 5M
Wire Sequence and Locating Cable Error
Check errors such as open circuit, short circuit, reverse connection, cross over or cross-talk interference
Locating Cable: Included 1 far-end passive test jack
Working Ambient Temperature: -10°C to 60°C
Automatic Time-delay Shut Off Time: The tester is idle for 30 minutes
Use 4 x AA batteries
Item size: 180 x 80 x 40 mm
Accessories:
INCLUDED: Multi-Network Cable Tester * Far-End Test Jack * Instruction Manual * Packed Safely in a Standard Factory Box